How much toner do i need to put in my printer?

I'm planning on refilling the cartridge in a printer for the first time. I've got all the instructions and Im pretty positive i know what to do. Its a samsung ML2010 series e. I have 3 bottles of toner. each 85grams. Will one bottle be enough? Or do i need to use more? or do i just fill the cartridge to the top?How much toner do i need to put in my printer?
Follow the directions provided.





One thing the directions will not tell you is that toner dust is pretty toxic stuff, make sure you are wearing a fine particulate mask and filling in an extremely well ventilated area.





Secondly did they send you a smart chip or roller assembly?


You cartridge will most likely not function properly without replacing both.





Third, not all toner is created equal. Ensure you have the correct toner for your model printer. If you are using too dense, to light or a toner with a different melting point that what the OEM specs are you run the risk of doing permanent damage to your fuser assembly and therefore your printer.





When we reman an ML2010 we do so by the complete weight of the assembly (excluding the roller and gear assembly which we replace after the toner has been added).





how much toner will be needed depends upon how much toner you have left. A lot of printers will prematurely tell you that your cartridge is empty.How much toner do i need to put in my printer?
If you have all the instructions , why ask the question, just read? how big is the cartridge in capacity? If your not sure after reading the instruction, I would leave it to the professional refillers, because if you don't take the necessary precautions. you got a big mess to clean and breathing in that stuff can be hazardous to your health? Without proper breathing protection and confined spaces?


Good Luck, I would read the dangers labels on side of cartridges? Disposal is another issue if your into looking after the enviroment?
Yes, one bottle/85grams is enough for this cartridge.